User Contributed                                            MET/CAL Procedure
=============================================================================
INSTRUMENT:            American-Reliance PPS-1302A:DC Power Supply
DATE:                  31-May-95
AUTHOR:                User Contributed      
REVISION:              0
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       1
NUMBER OF LINES:       48
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK+                                          X
  1.002  ASK-   R     N              P                            F        W
  1.003  HEAD         ÍÍ INITIAL CONDITIONS ÍÍ
  1.004  DISP         The following test equipment is required:
  1.004  DISP         1. Metered vaiac DTB # 2-172
  1.004  DISP         2. Transistor Devices DLP 50-150-3000A
  1.004  DISP         3. Sensitive Research 20 Amp Shunt DTB # 14-109
  1.005  DISP         Set the UUT front panel controls as follows:
  1.005  DISP         POWER ON/OFF ....................................... OFF
  1.006  DISP         Connect the System port 1 to the UUT HP-IB connector.
  1.007  DISP         All connections are made to the rear panel
  1.007  DISP         terminal strip.
  1.008  DISP         ÿ Connect the UUT and the 1281 as follows:
  1.008  DISP         ÿ[27][91]1m     1302A        TO        1281[27][91]m
  1.008  DISP         ÿ  OUTPUT  (+S) ÄÄÄÄÄÄÄÄÄÄÄÄ> INPUT-HIGH
  1.008  DISP         ÿ  OUTPUT  (-S) ÄÄÄÄÄÄÄÄÄÄÄÄ> INPUT-LO
  1.009  DISP         Connect UUT AC line cord to Metered Variac.
  1.010  DISP         Set the variac to 115 VAC.
  1.011  DISP         Set the UUT front panel controls as follows:
  1.011  DISP         POWER ON/OFF ........................................ ON
  1.012  IEEE         [D3000]
  1.013  CALL         American-Reliance PPS-1302A: Sub1
  1.014  CALL         American-Reliance PPS-1302A: Sub2
  1.015  IEEE         [SDC]
  1.016  HEAD
  1.017  DISP         Set the UUT front panel controls as follows:
  1.017  DISP         POWER ON/OFF ....................................... OFF
  1.018  HEAD         {}
  1.019  DISP         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
  1.019  DISP         {º THIS COMPLETES THE VERIFICATION º}
  1.019  DISP         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
  1.020  END
#! T.U.R.s less than 4.00:                  1
#! T.U.R.s estimated using RANGE value:     0
#! T.U.R.s not calculated (ASK- U):         0
#! T.U.R.s not computable at compile time:  10
#! FOR JUSTIFICATION REFER TO COMMENTS FOLLOWING EACH TEST IN THIS LISTING.